Good Sealers for Hardwood Table tops like Marri to preserve natural look

[DaleBlack]

359631359632The one on the left, Acrylic preserves the natural look of the timber whilst the marri on the right has been yellowed. I prefer the natural look personally.

Apparently they achieve this using the below products (either one) Ilva or Beckers

Acrylic coatings - Ilva (http://www.ilva.it/en/pages/60-acrylic-coatings)

or

Polyurethane Paints & Clears (http://www.22croma.com.au/products/solvent-based-coatings/two-pack-polyurethane-paints-clears/default.aspx)

The acrylics are apparently very watery and much harder to apply thereby requiring more skilled applicators.

What about this product http://www.feastwatson.com.au/consumer/products/exterior/product-details/1524 which Iam not sure is 2pac. Any opinions on my assumptions, the brand names etc is appreciated. Thanks

[DaleBlack]

I had one response from the Cabots Contact Us line
For you to retain the natural look a water based clear finish would be best. We do have a good commercial water based clear called Envirpro Endure 1 pack. This is a good durable coating and will heighlight the natural look of the timber. You will need to s eal the timber first with Envripro Timberseal followed by three coats of the Endure 1 pack. These products are only available through commercial woodcare distributors

[mike100jobstodo]

Great tips. I also like natural looking wooden furniture. I notice that over the years, they maintain their looks better as compared to wooden furniture that have been colour stained.