How to adjust this cavity slider?

[Reno RSS Feed]

I have to adjust this door and hope some one is familiar with it. The ones I am used to have a locking

nut and a fixed nut. You loosen the locking nut and turn the fixed nut to adjust the door.

This one has two locking nuts only. The bolt has a round head which slots into the carriage at the top and

I assume is threaded into the fitting attached to the top of the door. But how to turn the bolt?

The only thing I can think of is if the locking nuts were tightened together then turned as one would it turn

the bolt. ( I just thought of this so haven't tried it yet )

They carriage is the long ball bearing type and the mob that supplied them 9 years ago has gone out

of business and I don't know the maker.

http://www.renovateforum.com/attachments/f84/100064-how-adjust-cavity-slider-door-slder.jpg

http://www.renovateforum.com/attachments/f84/100065-how-adjust-cavity-slider-door-slder-2.jpg
Attached Images

http://www.renovateforum.com/images/attach/jpg.gif door slder.jpg (http://www.renovateforum.com/attachments/f84/100064d1390993358-how-adjust-cavity-slider-door-slder.jpg) (235.4 KB)
http://www.renovateforum.com/images/attach/jpg.gif door slder 2.jpg (http://www.renovateforum.com/attachments/f84/100065d1390993414-how-adjust-cavity-slider-door-slder-2.jpg) (218.3 KB)




Read and reply to the full thread at RenovateForum.com.... (http://www.renovateforum.com/f84/how-adjust-cavity-slider-111827/)