Reno RSS Feed
23rd November 2013, 10:10 AM
I am replacing the doors in my house and discovered that two of the frames are seriously undersized - after I bought the doors :doh:. Before I order a pair of custom doors for around $200 extra, I am thinking about customising the doors I already have. They are plain hollow core with masonite faces; cutting down the hinge side would leave 5 to 10mm of wood which I could rip out and replace with a new rail.
Does anyone have an idea on taking out the original rail without damaging the faces? My best idea so far is to make a custom fence for a small circular saw...
Read and reply to the full thread at RenovateForum.com.... (http://www.renovateforum.com/f84/customising-internal-door-undersized-frame-111336/)
Does anyone have an idea on taking out the original rail without damaging the faces? My best idea so far is to make a custom fence for a small circular saw...
Read and reply to the full thread at RenovateForum.com.... (http://www.renovateforum.com/f84/customising-internal-door-undersized-frame-111336/)