View Full Version : Liquid Glass
Lancerchris
19th July 2013, 05:59 PM
I have been playing around with "Aristocrat" Liquid Glass, a high gloss epoxy. It doesn't seem to be as liquid as I was hoping. Does anybody know what other brands and where (preferably in Australia) I could get them from?
Has anyone come across a nice liquid style exopy, in high gloss?
Is there an epoxy thinner or is pre-heating the only way of thinning it?
If there is a thinner, will it compromise the job or the finish?
All feedback welcome.
Prle77
19th July 2013, 08:29 PM
Hi Lancechris
Try Home page (http://glasscoat.com.au/)
Bunnings used to sell it but think they have recently stopped stocking it.. (try Masters)
Much more liquid and 1 to 1 mix ratio..
Use torch to pop any bubbles... I've got a pack (bunnings had it on special) but I'm yet to do it myself
Alen
Lancerchris
20th July 2013, 02:22 AM
Thanks Alen. I'll see if I can track some down. I noticed "Glass Coat" didn't get much of a wrap in other threads although we're all different. I do like that it is Australian with telephone support for technical enquiries. This could come in real handy. They should also be able to tell me a local distributor if I can't find one.
I'll let you know how it goes.
stevelkneivel
6th August 2013, 10:10 PM
How did you go with this? I've got an epoxy here distributed by Resimax here in Adelaide. They have many types, 3 are glass clear. #132 has the consistency of honey and can be thinned, but you can hit it with a heat gun and it flows out pretty well and loses bubbles. Super hard, sands and buffs. The other is called HX and is nearly like water, you could make a lens out if it just about. They also do a 5 minute "glass hard" pf liquid, but don't go there, if it goes off during the operation you're screwed. Great glue though. I put a acid cat on top of it.
_fly_
6th August 2013, 10:22 PM
I did my bed and bedside table in Adeze finish about 30 years ago and its still rock hard, won't push a thumbnail into that.
From a quick search of the web it seems to be still available.
Don't know if its epoxy or poly but its rock hard, has not yellowed and the gloss I used is still like glass.
Peter