Reno RSS Feed
18th July 2013, 01:00 PM
Good morning
I am building a stud wall, and I want to leave an opening for double 600mm doors to be installed.
Can someone suggest the appropriate gap between the studs that will allow the double 600mm doors and architraves etc to be installed.
I was thinking around 1250mm ?
Is there a standard ? I don't have any architrave kits or the doors as yet, I was going to get a chippy to come in and do that, but wanted to leave the correct opening.
Many thanks in advance
David
Read and reply to the full thread at RenovateForum.com.... (http://www.renovateforum.com/f84/frame-opening-dimensions-110208/)
I am building a stud wall, and I want to leave an opening for double 600mm doors to be installed.
Can someone suggest the appropriate gap between the studs that will allow the double 600mm doors and architraves etc to be installed.
I was thinking around 1250mm ?
Is there a standard ? I don't have any architrave kits or the doors as yet, I was going to get a chippy to come in and do that, but wanted to leave the correct opening.
Many thanks in advance
David
Read and reply to the full thread at RenovateForum.com.... (http://www.renovateforum.com/f84/frame-opening-dimensions-110208/)