G'day Guys

[RhysM]

Hi Guys, The Name's Rhys and I'm from Brisbane. I just bought my first wood lathe since highschool (almost 20 years ago). Im looking for some interesting ideas to try. I made my first pen on my father in-laws lathe a few weeks ago and If I must say i was pretty successful. Unfortunatley when I tried to make my own stylus from a piece of grevilia I wasnt so successful. My plan was to turn down a tube on the lathe and insert a cheap stylus i bought from a junk store down the midde. I was plauged by problems to do with my bore hole being off center and then shaping the tube too thin on one side. can anyone suggest a way I could retro-fit a 1/4 inch pen mandrel to suit an 8.5mm bore hole, whilst keeping everything centered.

Many thanks Guys

Rhys

[artme]

G'day Rhys and welcome to the show!! good to see you have a lathe and are ready to go!!!:2tsup::2tsup::2tsup:

What sort of lathe did you get??

[tdrumnut]

Gidday Rhys welcome to the forum, enjoy your stay. What part of Brissy are you from?

[crowie]

G'Day & Welcome to a top forum "Rhys".
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP photos with build notes.
Enjoy the forum.
Enjoy your woodwork.
Cheers crowie

[Christos]

Welcome to the forum.

[RhysM]

I bought a Woodfast WL305 from carbatec. Not the biggest unit on the market but it'll do me to get started again. I'm from Hemmant mate, not far from wynnum.

[JJF]

Welcome to a forum