Reno RSS Feed
30th January 2013, 10:00 PM
Hi all,
I need to square up some round patio pillars. Basically just box them in the entire height up to the eves. The pillar diameter is approximately 200 mm. Then I plan to tile them. The pillars are under the eves but are exposed to the weather. The lower part of the pillars get wet every time it rains. I was looking at 18 mm plywood to use as boxing as it suits future plans to enclose the patio. My question is which plywood to use? Marine,Film face, exterior? I obviously need something that's stable under moisture but can be tiled over. Any thoughts?
Cheers, Brad.
Read the full thread at RenovateForum.com... (http://www.renovateforum.com/f85/exterior-plywood-use-108260/)
I need to square up some round patio pillars. Basically just box them in the entire height up to the eves. The pillar diameter is approximately 200 mm. Then I plan to tile them. The pillars are under the eves but are exposed to the weather. The lower part of the pillars get wet every time it rains. I was looking at 18 mm plywood to use as boxing as it suits future plans to enclose the patio. My question is which plywood to use? Marine,Film face, exterior? I obviously need something that's stable under moisture but can be tiled over. Any thoughts?
Cheers, Brad.
Read the full thread at RenovateForum.com... (http://www.renovateforum.com/f85/exterior-plywood-use-108260/)