PDA

View Full Version : How to disassemble framed mirror wardrobe door?















Reno RSS Feed
21st January 2013, 09:50 AM
Hi,

I ordered some flat pack style built in wardrobes, ones that come with sliding mirror doors. I had to make the bulkhead lower in one of the rooms because it had bigger cornice, and so now the doors are too tall to fit (I was hoping the small change in height wouldn't have made much difference).

So my plan is to pull the frame off the mirror, score and snap the mirror and reassemble. But, I can't see how to remove the frame. It's not screwed in at the corners, it uses a rubber grip lock type seal I think. So I think it would just pull apart but I don't want to use too much force.

Here's a picture of the style of frame, not exactly the same, but it has the same grip things.
http://www.renovateforum.com/attachments/f84/95523d1358721952t-how-disassemble-framed-mirror-wardrobe-door-frame-cross-section.jpg (http://www.renovateforum.com/attachments/f84/95523d1358721952-how-disassemble-framed-mirror-wardrobe-door-frame-cross-section.jpg)

So will it just pull apart, and then go back together ok? Or would I need to cut the rubber and get new stuff?

Thanks.
Attached Thumbnails http://www.renovateforum.com/attachments/f84/95523d1358721952t-how-disassemble-framed-mirror-wardrobe-door-frame-cross-section.jpg (http://www.renovateforum.com/attachments/f84/95523d1358721952-how-disassemble-framed-mirror-wardrobe-door-frame-cross-section.jpg)



Read and reply to the full thread at RenovateForum.com.... (http://www.renovateforum.com/f84/how-disassemble-framed-mirror-wardrobe-door-108116/)