PDA

View Full Version : Hang the door (and the builder too!) (pics)















Reno RSS Feed
21st June 2012, 07:30 PM
I need some advice please.

Unit Door

The closing-edge of the door to my Unit tapers and has a gap at the bottom (5cms?) (see photo of white door). It may be that the Body Corporate will replace the door but could a builder build up the gap with artificial wood (glue) or something? The Body Corporate might pay for that.

House Gate

I want to replace the slats in my gate (see photo) with more posh palings but how can I marry up the existing holes in the frame to the holes I'll need to make in the new palings? Will I need to measure things? The solution might present when I embark on the job. I guess I could stuff a wet painted wick in the existing holes and press the paling against it?

Thank you very much
Attached Thumbnails http://www.renovateforum.com/attachments/f84/90817d1340266607t-hang-door-builder-too-pics-gate-door-pics-004.jpg (http://www.renovateforum.com/attachments/f84/90817d1340266607-hang-door-builder-too-pics-gate-door-pics-004.jpg) http://www.renovateforum.com/attachments/f84/90816d1340266521t-hang-door-builder-too-pics-gate-door-pics-001.jpg (http://www.renovateforum.com/attachments/f84/90816d1340266521-hang-door-builder-too-pics-gate-door-pics-001.jpg)



Read and reply to the full thread at RenovateForum.com.... (http://www.renovateforum.com/f84/hang-door-builder-too-pics-105034/)