feedback.. usergroups

[ToolCat]

I noticed something that I wonder if admin was aware of. "Guests" can view external images but "Registered Users" cannot. I just posted here (http://www.woodworkforums.com/f65/show-us-your-shaper-146358-post1429134/#post1429134)and noticed this when logged out and in. I think the setting may be in the admin "usergroups settings".

[RETIRED]

I am aware of it

It seems to be a quirk in the settings

I have been through the settings and there seems to be no where to alter the settings on the pictures.
:((

[ToolCat]

Hi , Received your pm. Thanks I can see the pics when logged in now.:U

Although, I read your post above before logging in to see your pm... so I went hunting for the setting. I am running vbulletin 3.8.6 and just now looked for where that setting might be. But you must have found it too.

adminCP -> Users -> search users -> Enter the ID and manually select "Yes" under Display Images.

A way so you don't have to do this for each user is to set this to "yes" as the default "display images" when a new member signs up. That setting is at:

adminCP -> User Registration Options -> Default Registration Options -> check the box: "Display Images"


edit update a few minutes later...
Hey, I think it might be that if you change that default to yes, all of the registered members that signed up when it was off will then be turned on.. so you won't have to do it for everyone one at a time.

[RETIRED]

Thanks for that TC. :wink: