Inlaid table - bleach spots

[libster25]

Hiya
We have an inlaid table which has some scratches and bleach spots. Can anyone advise on how to restore it? I'm a bit unsure as it has panels where the grain of the wood joins in different directions.
I'll try and post some pics.
Thanks!!

[libster25]

Can I sand it and re-seal it or will I need to stain it? Bleach it all?

Anyone??

[ian]

looking at your photos I'm almost certain that the table top is veneer -- possibly less than 1mm thick.

do you know what the finished is?

[libster25]

Hi Ian,

No idea I'm afraid...it was bought second hand. If we cant finish it as is we will probably paint it which seems like a shame.

Any ideas welcome!

Thanks

Libby

[ubeaut]

Give this stuff a go POLISH REVIVER (http://www.ubeaut.com.au/reviver.html) and if it doesn't fix it I doubt anything else will. Should get rid of the marks and rejuvenate the whole table top so long as the surface is in reasonable condition and not badly crazed.

Cheers - Neil :U

[libster25]

Thanks very much...will pick some up tomorrow and give it a go. When it arrived it looked like something had been spilt on it, I cleaned it with a general purpose kitchen spray and the spillage spots when white.

Will try your product and let you know!!