PDA

View Full Version : WOODWORKING QUIZ for 13 Nov 04














Ralph Jones
13th November 2004, 09:07 AM
Good Morning Friends,
Have you ever noticed how hard it is to change the sanding sleeve on your portable sanding drums?

What would be the best or even a good method to make the chore easier?

Respectfully,
RETIRED
13th November 2004, 09:14 PM
Use talcum powder on the rubber sleeve.
Ralph Jones
13th November 2004, 10:20 PM
Good Evening ,
Yes, you are right that is one method of doing it, however a fellow came up with an idea where he would insert the drum into his drill press and turn it on.
Then he took a sanding block and lightly removed a small amount of the rubber of the diameter, then when he loosened the drum the sleeves would fall right off, and inserting another one was a snap.

Thank you for your support.

Respectfully,