PDA

View Full Version : the sandpaperman















Pappy
13th October 2010, 08:14 PM
I am not sure where to post this, but I thought this was as good a place as any,

I recently had a minor issue with a product I purchased off the Sandpaper Man. I sent his e.mail address a message mainly to notify them in case it could have been a bigger issue.

I was pleasently surprised to recieve a reply within a couple of hours. Because of work commitments I didn't reply straightaway.

Within 24 hours "Kerry" contacted me via mobile phone and was genuinely concerned and could not have been more helpful :U:2tsup:

I would like to thank "Kerry" as I always considered their service "first rate" but he proved that customer service from "on-line" shops is alive and well.:2tsup::2tsup::2tsup:

michael polson
19th October 2010, 09:00 PM
bloody good to hear as I just registered with them after paying $1;80 a bloody sheet for #### chinese wet and dry paper at Bunnings

Castaway
19th October 2010, 09:34 PM
I am not sure where to post this, but I thought this was as good a place as any,

I recently had a minor issue with a product I purchased off the Sandpaper Man. I sent his e.mail address a message mainly to notify them in case it could have been a bigger issue.

I was pleasently surprised to recieve a reply within a couple of hours. Because of work commitments I didn't reply straightaway.

Within 24 hours "Kerry" contacted me via mobile phone and was genuinely concerned and could not have been more helpful :U:2tsup:

I would like to thank "Kerry" as I always considered their service "first rate" but he proved that customer service from "on-line" shops is alive and well.:2tsup::2tsup::2tsup:

I cant say enough good things about these guys.

RufflyRustic
20th October 2010, 12:28 PM
Me either! :):2tsup:

jatt
20th October 2010, 06:48 PM
How do the ROS discs rate from sandpaperman. As in them sticking to the hook velcro securely.

The crap I picked up from my local wont stay on, even after replacing the adhesive hook on my ROS. New discs straight from the box only stay on briefly. Tried both an after market hook and another I cut from a sheet of adhesive velcro from the velcro rep.

Castaway
20th October 2010, 07:55 PM
How do the ROS discs rate from sandpaperman. As in them sticking to the hook velcro securely.

The crap I picked up from my local wont stay on, even after replacing the adhesive hook on my ROS. New discs straight from the box only stay on briefly. Tried both an after market hook and another I cut from a sheet of adhesive velcro from the velcro rep.

Yeah I can recommend it. I've had not dramas with the stuff I've got.

woodsurfer
20th October 2010, 08:23 PM
Standard size sandpaper sheet $2.40 at mitre 10 kincumber nsw, there dreaming!

jatt
20th October 2010, 08:36 PM
Cool thanks. I will get some and give em a go.