View Full Version : WOODWORKING QUIZ for 25 Oct 04
Ralph Jones
25th October 2004, 09:37 PM
Good Evening Friends,
While planing lumber through your benchtop planer. What is the maximum thickness that you should set you planer each time for ease of planing and making it easier on your planer?
Respectfully,
echnidna
25th October 2004, 09:43 PM
2mm in pine and 1mm in hardwood on my carbatec
Bob Willson
27th October 2004, 03:59 AM
1/2 a mm slows down my 13" Hare & Forbes
Ralph Jones
27th October 2004, 09:39 PM
Good Evening Friends,
According to the conversion chart 1/32" = 25.4MM and unless the chart is wrong that is what I would run for the most part till I get down to the nitty gritty and then I would go to 1/64" cuts. However I thought that 25.4 MM was equal to one inch, I'm confused.
Thank you for your support.
Respectfully,
Toggy
27th October 2004, 09:45 PM
Sorry Ralph, BUT 25.4mm equals 1 inch.
Ken
Bob Willson
27th October 2004, 10:54 PM
1/32" = .79375 mm