finishing camphor laurel

[webe]

I have dried the timber for 12 months and cut log into rounds - sanded to a nice smooth finish , but a green stain in the timber shows thru and spoils the finished effect - how can I get a nice camphor finish to the timber?:rolleyes:

[RufflyRustic]

Hi webe

Any chance you can post a photo of the board / project?

Thanks
Wendy

[webe]

Thanks for your interest Wendy - I have dug out some rounds that were cut thinner some months ago and they are fine. It would seem that further drying is in order before I work on these green ones. Dennis

[ubeaut]

If they're going to be turned on the lathe then turn them now to a rough shape and allow them to dry out for a few months before finishing the turning.

or

Turn them as they are and finish them off they'll be fine.

[webe]

Thanks for replying 'U BEAUT" - Your reply has been very helpful. Dennis