bristolwoodwork
7th August 2010, 01:44 AM
Hello there,
I was hoping to come here and perhaps ask a little advice on what I should do with my new purchase.
I have just bought these two bedside cabinets (well this is wha I intend to use them for anyway). They look like they could do with a good clean up and some new protection before use.
Since bringing them home I have suddenly thought I have not a clue what to do, and have trawled a little through the internet looking for advice. Then I came acorss you lovely bunch of people so here I am.
I believe they are Walnut veneer possibly as the inside of the drawers seem to have a noticeable edge to them.
The varnish ? on the top of the drawer is very cracked in parts and on one of the units in particular the colouration seems very dark. Perhaps from it being used with a water glass ontop which has discoloured the units. (my speculation anyway).
Now I dont want to rush in and do something stupid that will ruin them even more, and would love for the potential to shine through.
Any advice on stage 1 >?
I have read that people use fine wire wool, but this seems a big step...
I have gently rubbed them with a lightly damp cloth to see if there was any dirt on the surface, but not much came off.
Ok quite some rambling, sorry about that, but any advice would be gratefully recieved.
I have attached some photos for your consideration. ( Please note that the photos make the pattern alot more visable due to the use of the flash)
Thanks
Dave
I was hoping to come here and perhaps ask a little advice on what I should do with my new purchase.
I have just bought these two bedside cabinets (well this is wha I intend to use them for anyway). They look like they could do with a good clean up and some new protection before use.
Since bringing them home I have suddenly thought I have not a clue what to do, and have trawled a little through the internet looking for advice. Then I came acorss you lovely bunch of people so here I am.
I believe they are Walnut veneer possibly as the inside of the drawers seem to have a noticeable edge to them.
The varnish ? on the top of the drawer is very cracked in parts and on one of the units in particular the colouration seems very dark. Perhaps from it being used with a water glass ontop which has discoloured the units. (my speculation anyway).
Now I dont want to rush in and do something stupid that will ruin them even more, and would love for the potential to shine through.
Any advice on stage 1 >?
I have read that people use fine wire wool, but this seems a big step...
I have gently rubbed them with a lightly damp cloth to see if there was any dirt on the surface, but not much came off.
Ok quite some rambling, sorry about that, but any advice would be gratefully recieved.
I have attached some photos for your consideration. ( Please note that the photos make the pattern alot more visable due to the use of the flash)
Thanks
Dave