1 week between stain and top coat ok?

[joez]

Hi All, normally I have the time to stain and finish in quick succession, but i really have been struggling to find the time lately.

I think I'll be able to do the finally sanding and staining this weekend, and if weather is permitting apply the final finish next weekend.

Is it ok to leave a piece with only stain for a week or will the extended time gap cause problems?

I'll be applying Wattyl stains and spraying pre-cat lacquer as a top coat.



thanks
Joe

[munruben]

Hi Joe, I don't see any problem with that myself. Might be an idea to sheet it over with dust sheets once the stain is dry to prevent too much dust settling on it. I usually give it a final wipe over anyway before applying a finish.
Excellent work by the way :2tsup::2tsup:

[Woodwould]

I wouldn't leave the piece unsealed for a single moment after the stain had dried... if the stain was water or meths-based. A careless handprint, a splashed drink, condensation drips, or any other moisture could spoil the whole thing for you.

[Kaisergrendel]

Agree with both of the above. I'd recommend finishing the stain as soon as possible while giving it proper protection against dust and moisture in between stages.