Sticking foam rubber

[Tools]

Guys, What is the best type of glue to stick foam rubber to itself? I am referring to the type you would find in a chair.

Tools

[soundman]

sprayable / brushable contact cement does the job very well.

I used to do fit outs for equipment cases.. that involved complex build ups in various foams....works very well.

best to put the two pieces together with the adhesive just a little green..still a little tacky....lign it up straight... you wont get a second chance.

If you are shaping the pieces... often best to glue up the cut to final shape....big carving knife with an edge fresh of the grinder works well...so does a band saw.

cheers

[HazzaB]

Hey Tools,

Soundman has the answer, the trimmers at work use drums of spray contact to glue everything that is foam or vinyl.

HazzaB

[pugwash]

yes. Contact adhesive works best. Electric carving knife is good for cutting complex shapes.

[munruben]

I find the spray on contact adhesive easiest to use and effective.

[Tools]

Thanks guys. I have some spray c0ontact adhesive. Don't know why I didn't think of it myself !

Tools