PDA

View Full Version : WOODWORKING QUIZ for 2 Sept. 04















Ralph Jones
2nd September 2004, 09:47 PM
Good Evening Friends,
When gluing up rails and stiles on doors with a beveled edge, how can you do it with out damaging the sharp edge with the clamps?

Respectfully,

journeyman Mick
2nd September 2004, 11:08 PM
Well, you could either glue the doors up and then bevel the edges or you could machine up some blocks/pads that fit onto your clamps and match the bevel.

Mick

Cliff Rogers
2nd September 2004, 11:20 PM
G'day.

What Mick...

Where've ya been Mick? :confused: Hope you weren't crook again.

Ralph Jones
3rd September 2004, 09:36 PM
Good Evening Friends,
Mick you are 100% correct as the blocks would protect the stiles from clamping damage.

They say a picture is worth a thousand words so here is one showing what we are talking about.

Respectfully,

journeyman Mick
3rd September 2004, 11:28 PM
Cliff,
thanks for the concern, just been very busy with work and fire brigade stuff, saving people from their own stupidity, doing hazard reduction burns and currently trying to get Ergon to cooperate with (and maybe even contribute to) our efforts. I've been lurking most nights, but generally too buggered to contribute.

Mick the chippy and firey.