Ralph Jones
31st July 2004, 09:51 PM
Good Evening Friends,
Dovetail bits come in an array of cutting angles usually 7 - 14 degrees and heights, on both 1/4" and 1/2" shanks. Generally speaking, the greater the cutting angle the stronger the joint.
There are three parts of a dovetail, can you name them?
Respectfully, :)
Dovetail bits come in an array of cutting angles usually 7 - 14 degrees and heights, on both 1/4" and 1/2" shanks. Generally speaking, the greater the cutting angle the stronger the joint.
There are three parts of a dovetail, can you name them?
Respectfully, :)