Reno RSS Feed
1st September 2009, 07:00 PM
Dear Plumbers and Plumberish-types,
I'm trying to run an 80mm Floor-Waste into a 50mm pipe, and I'm just wondering whether someone's doing a "concentric" Reducer, rather than the "offset" one that I'm showing ya' in the photo below. In other words, I want the centre of both ends to be in a straight line.
Attachment 76337 (http://www.renovateforum.com/attachment.php?attachmentid=76337)
A 50mm Female-socket at one end, and 80mm Pipe at the other would be the best combination (if it's available...).
Many Thanks,
Batpig.
Attached Thumbnails http://www.renovateforum.com/attachment.php?attachmentid=76337&stc=1&thumb=1&d=1251791446 (http://www.renovateforum.com/attachment.php?attachmentid=76337&d=1251791446)
Read the full thread at RenovateForum.com... (http://www.renovateforum.com/showthread.php?t=77446&goto=newpost)
I'm trying to run an 80mm Floor-Waste into a 50mm pipe, and I'm just wondering whether someone's doing a "concentric" Reducer, rather than the "offset" one that I'm showing ya' in the photo below. In other words, I want the centre of both ends to be in a straight line.
Attachment 76337 (http://www.renovateforum.com/attachment.php?attachmentid=76337)
A 50mm Female-socket at one end, and 80mm Pipe at the other would be the best combination (if it's available...).
Many Thanks,
Batpig.
Attached Thumbnails http://www.renovateforum.com/attachment.php?attachmentid=76337&stc=1&thumb=1&d=1251791446 (http://www.renovateforum.com/attachment.php?attachmentid=76337&d=1251791446)
Read the full thread at RenovateForum.com... (http://www.renovateforum.com/showthread.php?t=77446&goto=newpost)