Reno RSS Feed
1st September 2009, 04:00 AM
Im currently ripping up the evil vinyl thats covering my beautiful jarrah floorboards and need some advice.
After punching the nails in can I use a "Wax Stick" to fill the holes - keeping in mind I want to use Tung Oil on it after sanding.
And what can i do to clean up the excess glue and muck before sanding ? or do I just give it a once over with a coarse grain sandpaper? (Im going to use a PolyVac when I get to that.)
I've never done this before so any advice would be helpful
Read the full thread at RenovateForum.com... (http://www.renovateforum.com/showthread.php?t=77428&goto=newpost)
After punching the nails in can I use a "Wax Stick" to fill the holes - keeping in mind I want to use Tung Oil on it after sanding.
And what can i do to clean up the excess glue and muck before sanding ? or do I just give it a once over with a coarse grain sandpaper? (Im going to use a PolyVac when I get to that.)
I've never done this before so any advice would be helpful
Read the full thread at RenovateForum.com... (http://www.renovateforum.com/showthread.php?t=77428&goto=newpost)